Add Listing

2 Pack Sensky PIR Motion Activated Sensor Switch,D…

  • February 24, 2025
  • (6)
motion activated lighting system
2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 2
2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 3
2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 6
  1. motion activated lighting system
  2. 2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 2
  3. 2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 3
  4. 2 Pack Sensky PIR Motion Activated Sensor Switch,D... - Image 6

18 $

From the brand

Motion Sensor Light SwitchMotion Sensor Light Switch

Product Dimensions ‏ : ‎ 1.89 x 0.98 x 0.98 inches; 2.96 ounces
Date First Available ‏ : ‎ June 21, 2022
Manufacturer ‏ : ‎ Sensky
ASIN ‏ : ‎ B0B4MVHRK5

【Pir Motion Sensor】The function of the PIR sensor is triggered by detecting motion,auto activated ON/OFF, you can use it to control LED strips, fans, etc
【Delay time adjustment】The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time
【Light sensing and Sensitivity adjustable】This sensor can be adjusted from 10-300LUX value. The default value is greater than 20LUX, the light will not turn on, and when the value is less than 20LUX, the sensor can turn light on when motion detected within sensing range.Long sensing distance and high sensitivity, you can adjust the sensing distance according to your needs
【Wide Application】Mini Pir Motion Sensor Switch is suitable for a variety of different places: such as entrance lighting, cabinet lighting, gun safety lighting, under beds, corridors, basements, warehouses, garages, etc
【Energy saving】The working voltage(output/input) is DC 12V~30V.Low power consumption, saving electricity bills, simple operation, for installation. Fully meet the needs of daily life

Category:

Description

Price: $17.99
(as of Feb 24, 2025 14:02:26 UTC – Details)


From the brand

…

Customers say

Customers find that the motion detector device works well as a motion-activated night light. It’s simple for them to install, plugging into an existing power system. The motion sensor detects motion over 15 feet away at an angle and recycles almost instantly. They like the value for money. However, some customers have mixed opinions on its sensitivity, light level, and delay time.

AI-generated from the text of customer reviews

Related products

6 Comments

  • Paul

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    Great little motion/heat sensing switch
    Love everything about this little switch! It was simple to install and worked perfectly right out of the box with no adjustments needed to its default settings.I installed this in a deep kitchen cabinet that I use all the time. The inside of that cabinet was dark enough that I’d sometimes need a flashlight to find what I was after. No more! Installed this switch to the top of the cabinet with Velcro, ran a few 12 volt jewelry spotlights across the top and down one side and voila! Perfect light in that cabinet as soon as the cabinet door’s opened.I’d considered a magnetic switch, a push-button switch and a motion sensor switch. So glad I went with this Sensky sensor. If you need a simple switch for a 12 v device, this Sensky switch is a great option!

  • Donovan T Stevahn

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    Works exactly as intended
    Plugged it into the LED strip set I had and works as described. Now my mom has sufficient light when she comes home and lights up her driveway

  • AZ Couple

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    Works well for LED strip light in office cabinet
    I am using the BS010l as a motion switch to trigger an LED strip in a metal storage cabinet upon opening.SETUP: It plugged easily into the existing male/female jacks of the system I was using and I found setting the timers and sensitivity to be very easy by following the instructions clearly laid out on the package the sensor came in. Total setup took less than 2 minutes. It seems very user friendly, pretty plug and play.INITIAL IMPRESSIONS: I am very satisfied so far, it triggers the light strip as soon as the cabinet opens and the sensor has line of sight to a body generated IR source (I usually see the lights flick on as they’re triggered by my hand as I reach to swing the cabinet open). The light stays on for 8.5 minutes without being triggered again (I timed it several times out of curiosity) and I find its sensitive enough to remain triggered when I leave the cabinet open and am moving about the room anywhere within line of sight of the sensor. DOES IT WORK: it works well! It’s very handy and I think it’s worth it’s cost as long as it continues functioning as it is now. It will be triggered several times a day, every day. If I encounter any problems I will update this review. As of now, I recommend this sensor and I may even pick up another one to rig a similar LED system in a walk in closet.PROS: easy to install, easy to setup, understandable directions included, acceptable build quality, small size, decent looking, works well.CONS: none as of now. Will update if necessary.

  • warthorn

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    Great value, works as expected
    Works as described – put it into an appropriate volt/amp system where the lights are left in the “on” position, and this accurately detects your presence and completes the power loop. It was very easy to add into the existing power system of an LED light kit.Two elements are inconvenient. First is popping open the plastic case and working tiny knobs to set its sensitivity — realistically not a huge problem since you’ll probably only need to set it up the first time, but you’ll end up taking it apart a few times to get it dialed in. Nothing broke which is more than I can say for many plastic-clip based doodads like this. Second, the mounting screw holes on the sensor are super tiny. This really limits the types of screws you can use. Tiny screws are very annoying for seating into wood, or even some MDF, without stripping. My suggestion is while you have it apart, drill a small hole or two into the back side of the plastic case (behind/below the circuit board, not touching it) and screw it down that way — I cut the factory screw holes off mine with a razor blade to make it fit flush in a small space.One other quirk, I’ve noticed either a decline in the width of its detection or it has gotten slightly laggy. I approach it from the side in my setup and now have to walk about 2 feet further forward before it notices me, which makes a difference in the dark location it’s set up in. I will revise my review if it gets worse, for now I may just tweak where it is pointed.Overall, great value and does exactly what it is made for and a very compact package!

  • emilie pic

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    Good product, do the job very well.

  • VST

    2 months ago / February 24, 2025 @ 2:02 pm
    Reply

    One works perfectly but the other triggers the lights on randomly every couple of minutes when there is no motion. I switched them around and it’s definitely the sensor.Too bad I didn’t install them right away.

Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Welcome to Prime Seller! Find your dream property with ease. Browse our extensive listings of homes, apartments, land, and commercial spaces. We are committed to providing you with the best real estate options across the region. If you need assistance or have any questions, don't hesitate to contact our support team. Happy browsing Dismiss

Verified by MonsterInsights
Did you find the information you were looking for on this page?

0 / 400